Ultra-fast essential oil characterization by capillary GC on a 50 microm ID column

A 5 m x 50 microm capillary column with 0.05 microm stationary phase film thickness, with a calculated efficiency of almost 20,000 plates per metre (under optimum conditions), was used for very fasthigh resolution GC analysis of lime essential oil. The total analysis time of this volatile essential oil was less than 90 s. Fast GC is shown to be appropriate for essential oil quality assurance analysis, and quantitative results of key components are comparable with those obtained by using conventional GC analysis. The fast GC analysis is approximately 33 times faster than the conventional GC method.     

Preparation and crystal structure of a copper(II) uranyl(VI) binuclear chelate

Summary The structure of the heterobinuclear complex of Cu²⁺ and [UO₂]²⁺ with the tetraanionic ligand derived from the condensation of 1,2-diaminoethane witho-acetoacetylphenol has been determined from diffractometer data and refined to R = 5.2%. The crystals are monoclinic,P2₁/a, witha = 26.22(2),b = 14.79(2),c = 8.10(1) Å and = 104.65(5)°; Z = 4. The ligand employed has two different coordination sets of atoms, N₂O₂ and O₂O₂, two oxygen atoms being common to both donor sets. In the complex the copper atom, which is retained in the inner N₂O₂ chamber, is five coordinate being axially bonded to a solvent molecule, whilst the uranyl ion is incorporated in the outer O₂O₂ chamber. Another molecule of solvent is retained to preserve the preferred seven coordination of uranium.     

Cobalt blood levels after total hip replacement (THR): a new follow-up study in Trieste (Italy)

Cobalt and chromium release in patients undergone a metal-on-metal total hip replacement (THR) is a matter recently discussed and whose we do not have enough information about it yet. In literature there is little data and not completely indicative, in the biological fluids and organs the amounts of released metals are different. This is also due to the fact that cobalt and chromium blood levels can change depending on physical and working activity, individual feeding and metabolism. The results obtained confirm the presence of an increase of cobalt inthe blood of patients after total hip replacement, while the chromium levels are almost alike: average values in patients operated are 4.1 +/- 1.5 microg/L for cobalt (0.3 +/- 0.1 microg/L in the control group) and 4.5 +/- 2.9 microg/L for chromium (4.7 +/- 2.4 microg/L in the control group). In spite of the cobalt values stand below the concentration generally considered dangerous, the difference between the two examined groups points out that a risk exists for the health of these patients. These results must be confirmed by further studies, providing better information and more reliable and biocompatible materials.     

The calculation of equilibrium concentrations in large multimetal/multiligand systems

An algorithm for computing equilibrium concentrations by the “equilibrium constant” method is described. The main features of this algorithm are: (a) a damping procedure in conjunction with the Newton-Raphson technique that avoids divergence in dealing with very complicated (simultaneous presence of simple, mixed, protonated, polynuclear and hydroxypolynuclear species) and/or very large systems; (2) the use of devices to decrease core requirements, calculation time, and ill-conditioned problems; and (3) the calculation of errors in free and species concentrations from the uncertainties in analytical concentrations and in formation constants. Four systems are used for testing computer programs on calculation of equilibrium concentrations.     

A synthetic divalent cholera toxin glycocalix[4]arene ligand having higher affinity than natural GM1 oligosaccharide

A high-affinity ligand of cholera toxin, the divalent glycocalix[4]arene 1, was obtained by exploiting a combination of structure-based design of glycomimetic monovalent ligands and affinity enhancements by multivalent presentation through a calix[4]arene scaffold. It exhibits a slightly higher affinity for the toxin than its natural ligand, the GM1 oligosaccharide.     

Modulating charge-transfer interactions in topologically different porphyrin-C60 dyads

Control over the interchromophore separation, their angular relationship, and the spatial overlap of their electronic clouds in several ZnP-C(60) dyads (ZnP=zinc porphyrin) is used to modulate the rates of intramolecular electron transfer. For the first time, a detailed analysis of the charge transfer absorption and emission spectra, time-dependent spectroscopic measurements, and molecular dynamics simulations prove quantitatively that the same two moieties can produce widely different electron-transfer regimes. This investigation also shows that the combination of ZnP and C(60) consistently produces charge recombination in the inverted Marcus region, with reorganization energies that are remarkably low, regardless of the solvent polarity. The time constants of electron transfer range from the mus to the ps regime, the electronic couplings from a few tens to several hundreds of cm(-1), and the reorganization energies remain below 0.54 eV and can be as low as 0.16 eV.     

Novel heterocycle-based two-photon absorbing dyes

[structure: see text]. The synthesis and nonlinear optical characterization of two novel heteroaromatic-based chromophores is described. The new dyes present an A-pi-D-pi-A general framework, where A is a pi-deficient heteroaromatic ring (pyridine, quinoline, benzothiazole) and D a pi-excessive pyrrolyl moiety. Both systems exhibit large two-photon absorption (TPA) values in the femtoseconds regime (TPA cross section as high as 150 x 10(-50) cm(4) s photon(-1) molecule(-1) with 150 fs laser pulses). Their TPA-based optical limiting activity is also shown.     

PHOTOSENSITIZED REACTIONS OF POLY(U) WITH TRIS(2,2'' BIPYRIDYL)RUTHENIUM(II) AND PEROXYDISULFATE

The reactions of polyuridylic acid [poly(U)] with Ru(bpy)3(3+) [Ru(III)] and SO4.-, following UV and visible light irradiation of Ru(bpy)3(2+) [Ru(II)] in the presence of S2O8(2-), were studied in an argon-saturated aqueous solution using time-resolved absorption and conductivity methods. The kinetics of the Ru(III) conversion to Ru(II) in the presence of poly(U) was monitored spectroscopically either in the absence of SO4.- [rapid mixing with Ru(III)] or in its presence (after laser flash excitation, lambda exc = 353 nm). The conversion of Ru(III) to Ru(II) is complete at a [nucleotide]/[sensitizer] (N/S) ratio greater than or equal to 10 (rate constant k = 12 s-1) for rapid mixing and at N/S greater than or equal to 6 (k = 15 s-1 at N/S = 10) after laser pulsing. Conductivity measurements following the laser pulse revealed a fast conductivity increase (risetime less than 10 micros), due to the formation of charged species and protons. A slower increase in the 0.1-0.5 s range was observed for poly(U) but it is considerably smaller for poly(dU) and absent in uracil containing monounits. The slow increase is unaffected by pH changes in the 3.5-7 range, markedly reduced in the 7-9 range and is replaced by a slight decrease in conductivity in buffered solutions. An explanation is that poly(U)-bound excited Ru(II) reacts with S2O8(2-) forming Ru(III) and SO4.- as oxidizing species both of which react with poly(U) bases. The resulting base radicals react with Ru(III) or the ligands in the ruthenium complex, producing protons which give rise to the slow conductivity increase (k = 15 s-1 at N/S = 10). The formation of single-strand breaks and the ensuing release of condensed counterions does not appear to contribute significantly to the slow conductivity signal. At N/S less than 10 the observed rate and extent of Ru(III)--Ru(II) conversion and of the slow proton production vary markedly with the N/S ratio.     

Assembling heterocycle-tethered C-glycosyl and alpha-amino acid residues via 1,3-dipolar cycloaddition reactions

The 1,3-dipolar cycloadditions of C-glycosyl nitrile oxides and acetylenes to an alkyne and an azide, respectively, bearing a masked glycinyl moiety furnished disubstituted isoxazoles and triazoles. Unveiling the glycinyl group in these cycloadducts afforded C-glycosyl alpha-amino acids in which the two bioactive entities were tethered through rigid five-membered heterocycles. Optimized entries to the same compounds involved the use of unmasked but protected alkyne- and azide-containing amino acids as the partners of 1,3-dipolar cycloadditions.     

Triazole: the Keystone in Glycosylated Molecular Architectures Constructed by a Click Reaction

The copper(I)‐catalyzed modern version of the Huisgen‐type azide–alkyne cycloaddition to give a 1,4‐disubstituted 1,2,3‐triazole unit is introduced as a powerful ligation method for glycoconjugation. Owing to its high chemoselectivity and tolerance of a variety of reaction conditions, this highly atom‐economic and efficient coupling reaction is especially useful for the effective construction of complex glycosylated structures such as clusters, dendrimers, polymers, peptides, and macrocycles. In all cases the triazole ring plays a key role by locking into position the various parts of these molecular architectures. The examples reported and briefly discussed in this short review highlight the use of this reaction in carbohydrate chemistry and pave the way to further developments and applications.